Buy 1877815-801 ITEM 089 Part by Cargotec Sweden Ab with NSN 4720-01-441-3787 Today

Part Number: 1877815-801 ITEM 089
Alternate P/N: 1877815801ITEM089
Manufacturer: Cargotec Sweden Ab
NIIN: 014413787
CAGE Code: A184N
FSG: 47 Pipe Tubing Hose and Fittings
Country: USA
NCB Code: 01

Whether you are in the market for NSN parts, military and defense parts, aerospace parts, or other similar product solutions, Buy Military Fasteners is your one-stop shop with an expansive selection tracing back to premier manufacturers and entities that we trust. Thank you for taking an interest in part number 1877815-801 ITEM 089, a Cargotec Sweden Ab item that is listed alongside the description “Hose Assembly Nonmetallic” and the NSN 4720014413787. As part number 1877815-801 ITEM 089 is ready for purchase on our website at any time, you are invited to fill out and submit the RFQ form provided on this page for the means of requesting a quote for your comparisons. All that we ask is that you supply us with crucial details such as your target price and expected shipping time frame, that way we can best customize a solution that caters to your unique requirements and constraints alike.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

As customers explore our vast selection, they can take advantage of services like our CAGE Code search features or database filters to quickly locate products of interest for purchase. For example, part number 1877815-801 ITEM 089 is listed alongside the NSN 4720-01-441-3787, meaning that it also belongs to FSC 4720 Hose and Tubing Flexible. With this in mind, kick off procurement with us today with assurance that we can even fulfill your most difficult needs. 

NSN Information for Part Number 1877815-801 ITEM 089 with NSN 4720-01-441-3787, 4720014413787

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4720-01-441-3787

Item PartTypeName:

HOSE ASSEMBLY,NONMETALLIC

47200144137870N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
1877815-801 ITEM 089595

Characteristics Data of NSN 4720-01-441-3787, 4720014413787

MRCCriteriaCharacteristic
AAGRCROSS-SECTIONAL SHAPE STYLEROUND"
AARXINSIDE DIAMETER19.0 MILLIMETERS NOMINAL"
ABKUFLANGE THICKNESS6.7 MILLIMETERS NOMINAL 1ST END"
ABKUFLANGE THICKNESS6.7 MILLIMETERS NOMINAL 2ND END"
ADUYCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH22.3 MILLIMETERS NOMINAL 1ST END"
ADUYCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH22.3 MILLIMETERS NOMINAL 2ND END"
ADUZCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH47.6 MILLIMETERS NOMINAL 1ST END"
ADUZCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH47.6 MILLIMETERS NOMINAL 2ND END"
AECSBOLT HOLE QUANTITY4 1ST END"
AECSBOLT HOLE QUANTITY4 2ND END"
AFQNFLANGE LENGTH65.8 MILLIMETERS MAXIMUM 1ST END"
AFQNFLANGE LENGTH65.8 MILLIMETERS MAXIMUM 2ND END"
AGAVEND ITEM IDENTIFICATIONSTRATEGIC SEALIFT CONVERSION SHIPS CLASS"
AGFFFLANGE WIDTH49.8 MILLIMETERS NOMINAL 1ST END"
AGFFFLANGE WIDTH49.8 MILLIMETERS NOMINAL 2ND END"
AHNCCONNECTION STYLEPLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END"
AHNCCONNECTION STYLEPLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END"
AHNXBOLT HOLE DIAMETER10.3 MILLIMETERS NOMINAL 1ST END"
AHNXBOLT HOLE DIAMETER10.3 MILLIMETERS NOMINAL 2ND END"
AKUTEND FLANGE CONSTRUCTIONSOLID 1ST END"
AKUTEND FLANGE CONSTRUCTIONSOLID 2ND END"
AKUUEND CONNECTION DESIGNELBOW 2ND END"
AKUUEND CONNECTION DESIGNSTRAIGHT 1ST END"
AWLSCONNECTION TYPEPLAIN FACE FLANGE 1ST END"
AWLSCONNECTION TYPEPLAIN FACE FLANGE 2ND END"
CQGMMAXIMUM OPERATING PRESSURE6000.0 POUNDS PER SQUARE INCH"
CRDWHYDROSTATIC TEST PRESSURE45.0 KILOPASCALS"
CRFYFLOW ANGLE90.0 DEGREES 2ND END"
CRXXMEASURING METHOD AND LENGTH2400.0 MILLIMETERS NOMINAL WORKING"
CTCJFLANGE STYLEDOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END"
CTCJFLANGE STYLEDOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END"
AAGRCROSS-SECTIONAL SHAPE STYLEROUND"
AARXINSIDE DIAMETER19.0 MILLIMETERS NOMINAL"
ABKUFLANGE THICKNESS6.7 MILLIMETERS NOMINAL 1ST END"
ABKUFLANGE THICKNESS6.7 MILLIMETERS NOMINAL 2ND END"
ADUYCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH22.3 MILLIMETERS NOMINAL 1ST END"
ADUYCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH22.3 MILLIMETERS NOMINAL 2ND END"
ADUZCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH47.6 MILLIMETERS NOMINAL 1ST END"
ADUZCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH47.6 MILLIMETERS NOMINAL 2ND END"
AECSBOLT HOLE QUANTITY4 1ST END"
AECSBOLT HOLE QUANTITY4 2ND END"
AFQNFLANGE LENGTH65.8 MILLIMETERS MAXIMUM 1ST END"
AFQNFLANGE LENGTH65.8 MILLIMETERS MAXIMUM 2ND END"
AGAVEND ITEM IDENTIFICATIONSTRATEGIC SEALIFT CONVERSION SHIPS CLASS"
AGFFFLANGE WIDTH49.8 MILLIMETERS NOMINAL 1ST END"
AGFFFLANGE WIDTH49.8 MILLIMETERS NOMINAL 2ND END"
AHNCCONNECTION STYLEPLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END"
AHNCCONNECTION STYLEPLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END"
AHNXBOLT HOLE DIAMETER10.3 MILLIMETERS NOMINAL 1ST END"
AHNXBOLT HOLE DIAMETER10.3 MILLIMETERS NOMINAL 2ND END"
AKUTEND FLANGE CONSTRUCTIONSOLID 1ST END"
AKUTEND FLANGE CONSTRUCTIONSOLID 2ND END"
AKUUEND CONNECTION DESIGNELBOW 2ND END"
AKUUEND CONNECTION DESIGNSTRAIGHT 1ST END"
AWLSCONNECTION TYPEPLAIN FACE FLANGE 1ST END"
AWLSCONNECTION TYPEPLAIN FACE FLANGE 2ND END"
CQGMMAXIMUM OPERATING PRESSURE6000.0 POUNDS PER SQUARE INCH"
CRDWHYDROSTATIC TEST PRESSURE45.0 KILOPASCALS"
CRFYFLOW ANGLE90.0 DEGREES 2ND END"
CRXXMEASURING METHOD AND LENGTH2400.0 MILLIMETERS NOMINAL WORKING"
CTCJFLANGE STYLEDOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END"
CTCJFLANGE STYLEDOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END"

Related NSN Components of 1877815 801 ITEM 089

A Complete NSN Part Purchasing Platform

  • AS9120B and ISO 9001:2015
  • Aviation Suppliers Association Member
  • FAA AC 0056B Accredited
  • AS 6081:2012 Certification
  • ESD S20.20-2014 Certification

Thank You for Visiting.

If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top