Buy JJCS99631 Part by Clarostat Sensors And Controls with NSN 5905-01-201-9116 Today

Part Number: JJCS99631
NIIN: 012019116
CAGE Code: 12697
FSG: 59 Electrical and Electronic Equipment Components
Country: USA
NCB Code: 01

Whether you are in the market for NSN parts, military and defense parts, aerospace parts, or other similar product solutions, Buy Military Fasteners is your one-stop shop with an expansive selection tracing back to premier manufacturers and entities that we trust. Thank you for taking an interest in part number JJCS99631, a Clarostat Sensors And Controls item that is listed alongside the description “Resistor Variable Nonwire Wound” and the NSN 5905012019116. As part number JJCS99631 is ready for purchase on our website at any time, you are invited to fill out and submit the RFQ form provided on this page for the means of requesting a quote for your comparisons. All that we ask is that you supply us with crucial details such as your target price and expected shipping time frame, that way we can best customize a solution that caters to your unique requirements and constraints alike.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

As customers explore our vast selection, they can take advantage of services like our CAGE Code search features or database filters to quickly locate products of interest for purchase. For example, part number JJCS99631 is listed alongside the NSN 5905-01-201-9116, meaning that it also belongs to FSC 5905 Resistors. With this in mind, kick off procurement with us today with assurance that we can even fulfill your most difficult needs. 

NSN Information for Part Number JJCS99631 with NSN 5905-01-201-9116, 5905012019116

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-201-9116

Item PartTypeName:

RESISTOR,VARIABLE,NONWIRE WOUND

59050120191160N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
JJCS99631225

Characteristics Data of NSN 5905-01-201-9116, 5905012019116

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY2
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABPAUNDERCUT DIAMETER0.406 INCHES NOMINAL
ABPMBODY DIAMETER1.156 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.250 INCHES MAXIMUM
ABXFSHAFT LENGTH1.156 INCHES NOMINAL
ADAPMOUNTING BUSHING LENGTH0.375 INCHES NOMINAL
ADAQBODY LENGTH1.542 INCHES MAXIMUM
AEDXSHAFT STYLEROUND,STEPPED
AEEASWITCH TYPEROTARY
AEEDSWITCH VOLTAGE RATING IN VOLTS125.0 AND 10.0
AEFDACTUATOR TYPEDUAL CONCENTRIC
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION292.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE21.00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE6.00 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE192.00 INCH-OUNCES
AEFPNONTURN DEVICE RADIUS0.531 INCHES NOMINAL
AEGDMECHANICAL BACKLASH IN DEG ANGULAR ROTATION3.0
AEGJSWITCH CONTACT ARRANGEMENTSINGLE POLE,SINGLE THROW,NORMALLY OPEN,BOTH POSITIONS MAINTAINED
AFJNFRAGILITY FACTORMODERATELY RUGGED
AGQLUNDERCUT LENGTH0.125 INCHES NOMINAL
AJYNSCREW THREAD DIAMETER0.375 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
ARNHOPERATING POSITIONSTART OF ROTATION
AXGYMOUNTING METHODSTANDARD BUSHING
CBBLFEATURES PROVIDEDSWITCH
CBMECUBIC MEASURE3.329 CUBIC INCHES
CQCCELECTRICAL RESISTANCE PER SECTION5.000 KILOHMS ALL SECTIONS
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG312.0 MINIMUM AND 333.0 MAXIMUM
CQDBRESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT0.0 TO 5.5-55 DEG CELSIUS ALL SECTIONS AND 0.0 TO 3.0-25 DEG CELSIUS ALL SECTIONS AND 0.0 TO 1.5 0 DEG CELSIUS ALL SECTIONS AND-2.0 TO 2.0 85 DEG CELSIUS ALL SECTIONS AND 0.0 TO 4.5 120 DEG CELSIUS ALL SECTIONS
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 ALL SECTIONS
CQPHDEVICE DESIGN TYPENONTURN AT 9 OCLOCK
CQTMTERMINAL LOCATIONREAR-BOTTOM
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.25 FREE AIR 1ST SECTION AND 1.49 FREE AIR 2ND SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 ALL SECTIONS
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 ALL SECTIONS
CSDKSWITCH CURRENT TYPE AND RATING IN AMPS2.000 AC AND 10.000 DC
CXHNSHAFT BEARING TYPESLEEVE
TTQYTERMINAL TYPE AND QUANTITY8 TAB,SOLDER LUG

Related NSN Components of JJCS99631

A Complete NSN Part Purchasing Platform

  • AS9120B and ISO 9001:2015
  • Aviation Suppliers Association Member
  • FAA AC 0056B Accredited
  • AS 6081:2012 Certification
  • ESD S20.20-2014 Certification
Thank You for Visiting.

If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top