Buy 6064 Part by Sensor Systems Inc with NSN 5905-01-093-0705 Today

Part Number: 6064
Manufacturer: Sensor Systems Inc
NIIN: 010930705
CAGE Code: 04454
FSG: 59 Electrical and Electronic Equipment Components
Country: USA
NCB Code: 01

Whether you are in the market for NSN parts, military and defense parts, aerospace parts, or other similar product solutions, Buy Military Fasteners is your one-stop shop with an expansive selection tracing back to premier manufacturers and entities that we trust. Thank you for taking an interest in part number 6064, a Sensor Systems Inc item that is listed alongside the description “Resistor Variable Wire Wound Pre” and the NSN 5905010930705. As part number 6064 is ready for purchase on our website at any time, you are invited to fill out and submit the RFQ form provided on this page for the means of requesting a quote for your comparisons. All that we ask is that you supply us with crucial details such as your target price and expected shipping time frame, that way we can best customize a solution that caters to your unique requirements and constraints alike.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

As customers explore our vast selection, they can take advantage of services like our CAGE Code search features or database filters to quickly locate products of interest for purchase. For example, part number 6064 is listed alongside the NSN 5905-01-093-0705, meaning that it also belongs to FSC 5905 Resistors. With this in mind, kick off procurement with us today with assurance that we can even fulfill your most difficult needs. 

NSN Information for Part Number 6064 with NSN 5905-01-093-0705, 5905010930705

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-093-0705

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

59050109307050N
CIICHCCESDPMICCriticalityENAC
UG
Part NumberISCRNVCRNCCHCCMSDSSADC
6064525

Characteristics Data of NSN 5905-01-093-0705, 5905010930705

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER0.6250 INCHES MAXIMUM
AAVMPILOT LENGTH0.0620 INCHES NOMINAL
ABHPOVERALL LENGTH2.361 INCHES MAXIMUM
ABPAUNDERCUT DIAMETER0.781 INCHES MAXIMUM
ABPCUNDERCUT WIDTH0.0620 INCHES NOMINAL
ABPMBODY DIAMETER0.875 NOMINAL CENTIMETERS
ABWVSHAFT DIAMETER0.1248 INCHES MAXIMUM
ABXFSHAFT LENGTH0.750 INCHES NOMINAL
ADAQBODY LENGTH1.580 INCHES MAXIMUM
ADAVOVERALL DIAMETER1.062 INCHES MAXIMUM
AECZMOUNTING LIP DIAMETER0.8750 INCHES MAXIMUM
AEDAMOUNTING LIP DEPTH0.0620 NOMINAL INCHES
AEDXSHAFT STYLEROUND
AEDZSHAFT BEARING TYPEBALL
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600.0 MINIMUM
AEFKMAXIMUM STARTING TORQUE0.40 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE0.30 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE96.00 INCH-OUNCES
AEFYSHAFT END PLAY0.003 INCHES
AEFZSHAFT RUNOUT0.001 INCHES
AEGALATERAL RUNOUT0.003 INCHES
AEGBPILOT DIAMETER RUNOUT0.0015 INCHES
AEGCSHAFT RADIAL PLAY0.002 INCHES
AFJNFRAGILITY FACTORMODERATELY RUGGED
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODCLAMP RING
CBBLFEATURES PROVIDEDHUMIDITY PROOF
CBMECUBIC MEASURE0.950 CUBIC INCHES
CQCCELECTRICAL RESISTANCE PER SECTION20.0 PERCENT,RATED AMPERES C AND BETTER FLOORING
CQCHTAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION128.57 SINGLE SECTION AND 257.14 SINGLE SECTION AND 385.71 SINGLE SECTION AND 514.29 SINGLE SECTION AND 642.86 SINGLE SECTION AND 771.43 SINGLE SECTION AND 900.0 SINGLE SECTION AND 1028.57 SINGLE SECTION AND 1157.14 SINGLE SECTION AND 1285.
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG3600.0 MINIMUM
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.00071/0.00071 SINGLE SECTION
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2.5 7TH SECONDARY QUALITY
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION TERMINAL BASE LINEARITY
CRJSFIXED TAP QUANTITY PER SECTION27 SINGLE SECTION
CRKSTAP LOCATION TOLERANCE PER SECTION-2.0/2.0 DEG ANGULAR ROTATION SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-3.0/3.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSBXFUNCTION CHARACTERISTIC PER SECTION7 OCLOCK 11TH PRIMARY
CSCYTEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-20.0/20.0 SINGLE SECTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
FEATSPECIAL FEATURESSHAFT HAS GEAR,14 TEETH,127 PITCH,20 DEG P.A.,0.1102 IN. MAX DIA,FULL TOOTH 0.187 TO 0.218
PMLCPRECIOUS MATERIAL AND LOCATIONTERMINAL SURFACES GOLD
PMWTPRECIOUS MATERIAL AND WEIGHT1.200 GOLD GRAINS,TROY
PRMTPRECIOUS MATERIALGOLD
TESTTEST DATA DOCUMENT56910-10004-101 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR
TTQYTERMINAL TYPE AND QUANTITY30 TURRET

Related NSN Components of 6064

Part 6064 With Different Manufacturers

A Complete NSN Part Purchasing Platform

  • AS9120B and ISO 9001:2015
  • Aviation Suppliers Association Member
  • FAA AC 0056B Accredited
  • AS 6081:2012 Certification
  • ESD S20.20-2014 Certification
Thank You for Visiting.

If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top